Chi tiết
Tính năng sản phẩm
Tự động lấy nét
Máy đọc OPI-2201 có khả năng lấy nét tức thời giúp quét trong điều kiện di chuyển nhanh và kiểm soát độ tương phản, giúp quét ở khoảng cách xa và góc quét cao.
Thiết bị cắm và quét
Các tính năng kết nối của OPI-2201 cho phép người sử dụng nhanh chóng vận hành các tính năng quét.
Hiệu quả và mạnh mẽ
Sản phẩm Opticon OPI2201 có kiểu dáng đẹp và thiết kế tiện lợi mang lại sự thoải mái cho người điều khiển. Sản phẩm có thể chịu được khi rơi từ độ cao 1.5m và được thiết kế để quét trong khu vực có nhiệt độ thấp. Được thiết kế bằng vật liệu chất lượng cao, thiết kế này là hoàn hảo để tăng sức chịu đựng trong điều kiện môi trường khắc nghiệt.
Test Scanning of Opticon OPI-2201
Mở hộp và Thiết kế
Opticon OPI2201 được đóng gói trong 1 hộp giấy, bên ngoài hộp giấy gắn nhãn thể hiện thông tin sản phẩm, bên trong có máy OPI 2201 và giấy hướng dẫn sử dụng. Phần chân đế máy được đóng gói trong 1 hộp giấy khác và được sản xuất thành nhiều phần nhỏ, đóng gói 1 cách gọn gàng trong hộp. Khi sử dụng, chúng ta có thể lắp một cách dễ dàng.
|
|
|
Hộp máy OPI2201 và hộp chân đế máy. Trên hộp sản phẩm có nhãn dán thể hiện tên máy, xuất xứ, và số seri của sản phẩm |
Các chi tiết sản phẩm bên trong hộp máy OPI 2201 được gói cẩn thận |
Bên trong hộp đựng chân máy OPI 2201 |
|
|
|
Gồm có: máy OPI 3601, chân đế (các chi tiết của chân để được tháo rời khi đóng hộp), giấy hướng dẫn sử dụng. |
OPI 3601 sử dụng mắt đọc 2D CMOS Imager, có thể quét được các mã 1D và mã 2D. Trên thân máy có nút bấm sử dụng khi quét bằng tay (chế độ quét thủ công). |
OPI 2201 là dòng máy quét cầm tay sử dụng trong công nghiệp, do đó thiết kế máy chắc chắn, phù hợp với môi trường làm việc. |
|
|
|
· Phần đầu máy được thiết kế ấn tượng, chắc chắn, dễ cầm khi sử dụng |
Phía cuối thân máy có dán nhãn của nhà sản xuất thể hiện tên sản phẩm, số seri |
Ngoài chế độ quét bằng tay (thủ công), khi đặt OPI 2201 lên chân đế, máy tự động chuyển sang chế độ quét tự động (auto- trigger). |
Trải nghiệm thực tế
Để kết nối máy OPI2201 với máy tính rất đơn giản, bạn chỉ cần cắm đầu USB ở máy vào cổng USB trên máy tính hoặc laptop. Mặc dù là sản phẩm chuyên dụng nhưng việc sử dụng máy Opticon OPI2201 rất đơn giản. Máy có tính tương tích cao, chỉ cần kết nối máy tính, laptop thông qua giao thức USB hoặc RS232C là có thể sử dụng không cần phải cài đặt driver hay trình điều khiển nào.
Giấy hướng dẫn sử dụng đi kèm cung cấp nhiều tính năng, chế độ quét và cài đặt thiết lập cho máy. Để kích hoạt tính năng/chế độ mong muốn hay tinh chỉnh cài đặt, bạn chỉ cần dùng máy quét với đoạn mã tương ứng được chú thích. Bạn cũng có thể thay đổi thời gian quét tự động, âm lượng âm báo, độ dài âm báo, bật tắt các chế độ quét QR-code, mã vạch…
OPI 2201 có thể quét được các mã 1D và 2D trên nhiều chất liệu khác nhau. Ngoài ra, OPI2201 có thể đọc được các mã 2D có kích thước siêu nhỏ thường được gắn trên các linh kiện điện tử mà ít có dòng máy cầm tay nào có thể đọc được
Một số tính năng nổi bật OPI2201
- Thương hiệu Nhật Bản và bảo hành 2 năm toàn cầu
- Thiết kế gọn nhẹ, chống sốc ở độ cao 1,8m
- Hỗ trợ kết nối linh hoạt (USB,RS-232 hoặc Keyboard Wedge), tính tương thích cao, dễ sử dụng
- Quét được trên chất liệu trơn bóng, phản quang, trong suốt, bên mặt cong.
- Quét và giải mã được những mã có độ nén cao, phức tạp.
- Đọc được các mã 2D với kích thước siêu nhỏ.
Đặc tính kỹ thuật
Operating indicators |
|
Visual |
1 LED (red/green/orange) |
Non-visual |
Buzzer |
Operating keys |
|
Entry options |
1 scan key |
Communication |
|
RS232 |
DB9 PTF connector with external power supply |
Keyboard Wedge |
MiniDIN6 F/M connector with external power supply |
USB |
Ver. 1.1, HID/VCP, USB-A connector |
Power |
|
Voltage requirement |
5V ± 10% (USB), 6V ± 10% (RS232 and Keyboard Wedge) |
Current consumption |
Max. 350mA (scanning), max. 75mA (standby) |
2D Imager Optics |
|
2D Light source |
Aiming laser diode, illumination LEDs |
2D Scan method |
CMOS area sensor, SXGA (1.3 million pixels), gray scale
|